SPUME FOOTHOLDS 1
Ten positive footholds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 904 Max. surface slope: 30° Grip: foothold Number of holds: 10 pcs/set No.: 951, 952, 953, 954, 955, 956, 957, 958, 959, 960 Montage: 10pcs…
Read MoreSPUME FOOTHOLDS 2
Ten positive footholds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 856 Max. surface slope: 45° Grip: foothold Number of holds: 10 pcs/set No.: 961, 962, 963, 964, 965, 966, 967, 968, 969, 970 Montage: 10pcs…
Read MoreSPUME SMALL JUGS
Twelve positive holds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Holds are suitable for beginner climbers and climbing in large overhangs. Holds are also suitable for mounting on fiberglass climbing wall. Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 4200 Max. surface slope:…
Read MoreSPUME SMALL JUGS 2
Twelve positive holds in the Spume design. Fastened with capheaded or countersunk bolts M10 (dual system). Holds are suitable for beginner climbers and climbing in large overhangs. Holds are also suitable for mounting on fiberglass climbing wall. Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 4000 Max. surface slope:…
Read MoreSPUME MEDIUM JUGS
Eight positive holds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Holds are suitable for beginner climbers and climbing in large overhangs. Holds are also suitable for mounting on fiberglass climbing wall. Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 4892 Max. surface slope:…
Read MoreSPUME BIG JUGS
Six positive holds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Holds are suitable for beginner climbers and climbing in large overhangs. Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 6553 Max. surface slope: 60° Grip: big jug Number of holds: 6 pcs/set Montage:…
Read MoreSPUME POCKETS 1
Six holds in the range Spume. It is two fingers pockets with different depths of grip. Suitable for large overhangs for advanced climbers. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 5164 Max. surface slope: 60° Grip: Fingerpocket Number of…
Read MoreSPUME BIG POCKETS
Five positive pockets in various sizes. Fastened with capheaded bolts M10. Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 7252 Max. surface slope: 90° Grip: Fingerpocket Number of holds: 5 pcs/set No.: #933, #934, #935, #936, #937 Montage: 5pcs capheaded bolts – 1x M10 x 40 mm, 1x M10…
Read MoreSPUME SLOPERS 1
Six sloper holds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 7410 Max. surface slope: 30° Grip: sloper Number of holds: 6 pcs/set No.: 980, 981, 982, 983, 984,985 Montage: 6pcs capheaded bolts – 2x M10…
Read MoreSPUME SLOPERS 2
Bolts are not included. Attractive design. Easily recognizable holds on the climbing wall. Great for bouldering. Weight [g]: 6600 Max. surface slope: 0° Grip: sloper Number of holds: 6 pcs/set No.: #991, #992, #993, #994, #995, #996 Montage: 6pcs capheaded bolts – 1x M10 x 40 mm, 1x M10 x 50 mm, 3x M10 x…
Read MoreSPUME BIG SLOPERS
Two big sloper holds in the Spume design. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Weight [g]: 3800 Max. surface slope: 45° Grip: sloper Number of holds: 2 pcs/set No.: #989, #990 Montage: 2pcs capheaded…
Read MoreSPUME PINCHES 1
Twelve positive holds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 7439 Max. surface slope: 45° Grip: pinch Number of holds: 12 pcs/set No.: 938, 939, 940, 941, 942, 943, 944, 945, 946, 947, 948, 949…
Read MoreSPUME ONE
One big hold in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system) or with three screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 3800 Max. surface slope: 30° Grip: sloper Number of holds: 1 pcs No.: #950 Montage: 1pcs capheaded bolts -1 x M10…
Read MoreJIBS 1
Ten screw-on positive holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 1082 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set Montage: 34pcs of screws M 5.0 x 35 mm. Tightening torque acting on the screw fastening is…
Read MoreJIBS 2
Ten screw-on crimpy holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 1082 Max. surface slope: 0° Grip: small crimp Number of holds: 10 pcs/set No.: #71, #72, #73, #74, #75, #76, #77, #78, #79, #80, Montage: 25pcs of screws M…
Read MoreJIBS 3
Ten screw-on slopy holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 947 Max. surface slope: -10° Grip: sloper Number of holds: 10 pcs/set No.: #81, #82, #83, #84, #85, #86, #87, #88, #89, #90 Montage: 24pcs of screws M 5.0…
Read MoreJIBS 4
Ten screw-on positive holds in “fontainebleau” shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 1006 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set No.: #91, #92, #93, #94, #95, #96, #97, #98, #99, #100 Montage: 27pcs of screws M…
Read MoreJIBS 5
Ten screw-on positive holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 990 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set No.: #101, #102, #103, #104, #105, #106, #107, #108, #109, #110 Montage: 20 pcs of screws…
Read MoreMICRO A DUAL
Twenty positive footholds of various shapes. Fastened with cap head bolts M10. Bolts are not included. Weight [g]: 678 Max. surface slope: 60° Grip: foothold Number of holds: 20 pcs/set Montage: 20pcs cap head bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended for maximum 25Nm. Size: 20 x micro…
Read MoreMICRO B DUAL
Twenty footholds of various shapes. Fastened with cap head bolts M10. Bolts are not included. Weight [g]: 705 Max. surface slope: 45° Grip: foothold Number of holds: 20 pcs/set Montage: 20pcs cap head bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended for maximum 25Nm. Size: 20 x micro Material:…
Read MoreSTUPY 1
Twenty positive footholds of various shapes (according to our design of our sets). Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 1177 Max. surface slope: 60° Grip: foothold Number of holds: 20 pcs/set No.: #151, #152, #153, #154, #155, #156, #157, #158, #159, #160, #161, #162, #163, #164, #165, #166, #167, #168,…
Read MoreXS 1
Ten small holds of round shapes. Fastened with capheaded bolts M10. Holds are also suitable for use as large footholds. Bolts are not included. Weight [g]: 1130 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set No.: #201, #202, #203, #204, #205, #206, #207, #208, #209, #210 Montage: 10pcs capheaded bolts M10 x…
Read MoreXS 1 MIX
Ten small holds of sloper shapes in ten random colors. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 1130 Max. surface slope: 0° Grip: for children Number of holds: 10 pcs/set No.: #201, #202, #203, #204, #205, #206, #207, #208, #209, #210 Montage:…
Read MoreXS 2
Ten small holds of positive shapes. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 1201 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set No.: #211, #212, #213, #214, #215, #216, #217, #218, #219, #220 Montage: 10pcs capheaded bolts M10 x…
Read MoreXS 2 MIX
Ten small holds of positive shapes in ten random colors. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 1201 Max. surface slope: 30° Grip: for children Number of holds: 10 pcs/set No.: #211, #212, #213, #214, #215, #216, #217, #218, #219, #220 Montage:…
Read MoreXS 3
Ten small holds of positive shapes. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 839 Max. surface slope: 30° Grip: edge Number of holds: 10 set/set Montage: 10pcs capheaded bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended…
Read MoreXS 4
Ten small holds of crimpy shapes. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 946 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended for maximum 25Nm. Size: 10 x XS Material:…
Read MoreS1
Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds, children walls or climbing at overhang. Bolts are not included. Weight [g]: 2080 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set No.: #241, #242, #243, #244, #245, #246, #247, #248, #249, #250 Montage: 10pcs capheaded…
Read MoreS1 MIX
Ten holds of positive shapes in random colors. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds, children walls or climbing at overhang. Bolts are not included. Weight [g]: 2080 Max. surface slope: 60° Grip: for children Number of holds: 10 pcs/set No.: #241, #242, #243, #244, #245, #246, #247, #248, #249,…
Read MoreS2
Ten holds of positive-pocket shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds, children walls or climbing at overhang. Bolts are not included. Weight [g]: 1569 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set No.: #251, #252, #253, #254, #255, #256, #257, #258, #259, #260 Montage: 10pcs capheaded…
Read MoreS2 mix
Ten holds of positive shapes in random colors. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds, children walls or climbing at overhang. Bolts are not included. Weight [g]: 1344 Max. surface slope: 30° Grip: for children Number of holds: 10 pcs/set #211, #212, #213, #214, #215, #216, #217, #218, #219, #220…
Read MoreS3
Ten holds of crimpy shapes. Fastened with capheaded bolts M10. Useful for intermediate climbers. Bolts are not included. Weight [g]: 1662 Max. surface slope: 0° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening torque acting on the bolt fastening…
Read MoreS4
Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls. Bolts are not included. Weight [g]: 1491 Max. surface slope: 45° Grip: edge Number of holds: 10 pcs/set No.: #271, #272, #273, #274, #275, #276, #277, #278, #279, #280 Montage: 10pcs capheaded bolts M10 x…
Read MoreS5
Ten positive holds in the limestone design. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50…
Read MoreS6
Ten positive holds. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 60° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50 mm. Tightening torque acting…
Read MoreS 7 DROPS
You will try to use thumb during climbing on this ten crimp holds. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Climbing holds great for bouldering and hard endurance routes. Attractive design. Weight [g]: 2750 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set No.:…
Read MoreS 8 CORC
Ten crimps holds. On these climbing holds you will try push your fingers deeper inside. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Climbing holds great for bouldering and hard endurance routes. Picot edge design. Weight [g]: 2344 Max. surface slope: 30° Grip: small crimp Number of holds:…
Read MoreMEDIUM 1
Ten holds of slopery shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls. Bolts are not included. Weight [g]: 2352 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening…
Read MoreMEDIUM 2
Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls. Bolts are not included. Weight [g]: 2604 Max. surface slope: 45° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended…
Read MoreMedium 2 mix
Ten positive holds various sizes in random colors and style of colour. Fastened with capheaded bolts M10. Holds are suitable for childrens and beginning climbers. Bolts are not included. Weight [g]: 2604 Max. surface slope: 45° Grip: for children Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended for maximum 40Nm. Size: 4xS, 6xM…
Read MoreMEDIUM 3
Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls Bolts are not included. Weight [g]: 2832 Max. surface slope: 45° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 5x M10 x 40 mm, 3x M10 x 50 mm, 2x M10…
Read MoreDÍRY 3
Ten positive fingerpocket holds. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 6870 Max. surface slope: 60° Grip: Fingerpocket Number of holds: 10 pcs/set No.: #331, #332, #333, #334, #335, #336, #337, #338, #339, #340 Montage: 10pcs capheaded bolts – 2x M10 x 40 mm, 7x M10 x 50 mm, 1x M10…
Read MoreDÍRY 4
Ten fingerpockets different sizes. Fastened with capheaded bolts M10. Useful for intermediate climbers. Bolts are not included. Weight [g]: 2485 Max. surface slope: 30° Grip: Fingerpocket Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 10x M10 x 40 mm + 10pcs screws M 5.0 x 40 mm.Tightening torque acting on the bolt fastening…
Read MoreDÍRY 5
Five holds, different sizes of shapes with a hole design. Fastened with capheaded bolts M10 or just screws anywhere on the wall. Bolts are not included. Possibility fasten only with screews. Weight [g]: 5790 Max. surface slope: 30° Grip: Fingerpocket Number of holds: 5 pcs/set Montage: Holds can be mounted in combination with bolt and…
Read MoreDÍRY 6
Five holds, different sizes of shapes with a hole design. Fastened with capheaded bolts M10 or just screws anywhere on the wall. Bolts are not included. Possibility fasten only with screews. Weight [g]: 5520 Max. surface slope: 30° Grip: Fingerpocket Number of holds: 5 pcs/set Montage: Holds can be mounted in combination with bolt and…
Read MoreSELECT 1
Six pockets holds. Selection of best holds from archived sets of holds. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. For bouldering. Weight [g]: 2624 Max. surface slope: 0° Grip: Fingerpocket Number of holds: 6 pcs/set No.: #321, #322, #323, #324, #325, #326 Montage: 6pcs capheaded bolts – 2x M10…
Read MoreOBLINY 4
Ten good slopers. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4389 Max. surface slope: 45° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 6x M10 x 50 mm, 3x M10 x 60 mm, 1x M10 x 70 mm. Tightening torque acting on the bolt fastening is recommended for…
Read MoreOBLINY 5
Ten grips, various sizes mostly round shapes with design line. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4400 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 1x M10 x 40 mm, 8x M10 x 50 mm, 1x M10 x 60 mm + 10pcs screws…
Read MoreOBLINY 6 Cant
Ten flatted grips, similar sizes, mostly round shapes. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 2550 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 10x M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening torque acting on the bolt fastening…
Read MoreSELECT 2
Five sloper holds. Selection of best holds from archived sets of holds. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. For bouldering. Weight [g]: 5802 Max. surface slope: 0° Grip: sloper Number of holds: 5 pcs/set No.: #361, #362, #373, #384, #385 Montage: 5pcs capheaded bolts – 2x M10 x…
Read MoreNATURE 1
Ten positive holds of different sizes, shape reminiscent of french bouldering area of Fontainebleau. Fastened with screws M10 capheaded holds. Bolts are not included. Weight [g]: 5070 Max. surface slope: 45° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 5x M10 x 40 mm, 2x M10 x 50 mm, 2x M10 x…
Read MoreNATURE 2
Ten positive holds different sizes, shape reminiscent holds of french limestone areas. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 3505 Max. surface slope: 90° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 6x M10 x 40 mm, 2x M10 x 50 mm, 1x M10 x 60 mm, 1x…
Read MoreNATURE 3
Ten holds of different sizes, shapes and roughened surface like holds in granite areas. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 2262 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 8x M10 x 40 mm, 2x M10 x 50 mm. Tightening torque acting…
Read MoreNATURE 4
Ten holds of different sizes, shape reminiscent of french bouldering area of Fontainebleau. Fastened with screws M10 capheaded holds. Bolts are not included. Weight [g]: 3950 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6x M10 x 40 mm, 1x M10 x 50 mm, 1x M10 x…
Read MoreNATURE 5
Ten holds of different sizes. The shape is suitable for difficult climbing in the more overhang profile. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 5688 Max. surface slope: 60° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded – 5x M10 x 50 mm, 5x M10 x 60 mm, +…
Read MoreNATURE 6 Slate
Ten “rock” holds different sizes, shape like the rock. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4821 Max. surface slope: 45° Grip: small crimp Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6x M10 x 40 mm, 2x M10 x 50 mm, 2x M10 x 60 mm, + 10pcs…
Read MoreNATURE 7
Ten positive holds similar sizes, shape reminiscent holds of french limestone areas. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 3900 Max. surface slope: 90° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50 mm. Tightening torque acting on the…
Read MoreNATURE 8 Slate
Ten holds in the rock design, suitable for advanced climbers. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 45° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs…
Read MoreNATURE 9
Ten positive holds in the limestone design. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50…
Read MoreCOSMIX 1
Ten holds of various sizes, shape allowing several modes of grip. Bolts are not included. Weight [g]: 2129 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 9x M10 x 40 mm, 1x M10 x 50 mm + 4pcs screws M 5.0 x 40 mm. Tightening torque acting…
Read MoreCOSMIX 2
Ten crimpy holds of various sizes. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4010 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 8x M10 x 40 mm, 1x M10 x 50 mm, 1x M10 x 60 mm + 8pcs screws M 5.0 x…
Read MoreCOSMIX 3
Ten holds “piggy or stumps” of various sizes, shape allowing several ways of grip. Bolts are not included. Weight [g]: 4450 Max. surface slope: 60° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 7x M10 x 40 mm, 2x M10 x 50 mm, 1x M10 x 60 mm + 9pcs screws…
Read MoreCOSMIX 4
Ten holds of various sizes, shape allowing several ways of grip. Bolts are not included. Weight [g]: 2172 Max. surface slope: 30° Grip: pinch Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 10x M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening torque acting on the bolt fastening is…
Read MoreCOSMIX 5
Ten holds in the rock design, suitable for advanced climbers. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 45° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs…
Read More