MINI 1 PU

blank

Thirty small screw-on footholds in various shapes from polyurethane. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 583 Max. surface slope: 45° Grip: foothold Number of holds: 30 pcs/set Montage: 60pcs of screws M 5.0 x 35 mm. Tightening torque acting on the screw…

Read More

MINI 2 PU

blank

Thirty small screw-on footholds in various shapes from polyurethane. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 581 Max. surface slope: 45° Grip: foothold Number of holds: 30 pcs/set Montage: 60pcs of screws M 5.0 x 35 mm. Tightening torque acting on the screw…

Read More

MINI 3 PU

blank

Thirty flat screw-on footholds in various shapes from polyurethane. Useful for expert climbers! They are for fixing on flat plywood. Screws are not included in set. Steel washers inside Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush during cleaning due to…

Read More

MINI 4 PU

blank

Thirty crimpy screw-on footholds in various shapes from polyurethane. Useful for expert climbers also as crimps! They are for fixing on flat plywood. Screws are not included in set. Steel washers inside Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush during…

Read More

MINI 5 PU+

blank

Thirty crimpy screw-on footholds in various shapes from polyurethane. Useful for expert climbers! They are for fixing on flat plywood. Screws are not included in set. Great for bouldering and endurance routes. Weight [g]: 474 Max. surface slope: 30° Grip: footholds Number of footholds: 30 pcs/set No.: #1308, #1309, #1310, #1311, #1312, #1313, #1314, #1315,…

Read More

Jibs 7 PU

blank

Ten screw on crimps. Holds are suitable to use around edges of climbing walls and volumes. The holds extend beyond the edge, creating a positive grip. Fastened with screws. Bolts are not included. Suitable for advanced climbers. Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush during…

Read More

MICRO C PU

blank

Twenty footholds of flat shapes. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush during cleaning due to surface smoothing holds! Weight [g]: 730 Max. surface slope: 0° Grip:…

Read More

XS 5 PU

blank

Ten small, positive crimps suitable for strong fingers. Old climbing holds again in production. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Great climbing holds for bouldering. XS K1 – old name of this set of holds. Properties of polyurethane holds are more softness and flexibility. Due to these properties…

Read More

XS 6 PU

blank

Ten small crimps, maybe little sharp, suitable for strong fingers. Old climbing holds again in production. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Great climbing holds for bouldering. XS K2 – old name of this set of holds. Properties of polyurethane holds are more softness and flexibility. Due to…

Read More

XS 7 PU

blank

Ten small crimps, suitable for system boards and bouldering. Holds are axially symmetric. Old climbing holds again in production. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Great climbing holds for bouldering. Suitable for system board. XS K3 – old name of this set of holds. Properties of polyurethane holds…

Read More

OBLINY 7 PU

blank

Twenty flatted holds, similar sizes, mostly round shapes suitable for use on volumes. Very good also as footholds. Fastened with capheaded bolts M10. Bolts are not included. Great for bouldering. Suitable for use on volumes. Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used…

Read More

CRUX 10 PU

blank

Dvacet lištových chytů. Perfektní pro použití ve velkých převisech. Připevňují se pomocí šroubů M10 s válcovou nebo zápustnou hlavou (dual system) a nebo pouze pomocí vrutů. Šrouby nejsou součástí balení. Perfektní lezecké chyty pro bouldering a hlavně do vytrvalostních cest. Velmi vhodné pro montáž do převisů. Vlastností všech polyuretanových chytů je větší měkkost a pružnost takže…

Read More

MEGA 1 PU

blank

One hold, long like snake. This curved pinch is quite positive. Fastened with capheaded or countersunk bolts M10 (dual system) and two screws.. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Weight [g]: 1600 Max. surface slope: 30° Grip: pinch Number of holds: 1 pcs No.: #779 Montage: 1pcs capheaded bolts…

Read More

MEGA 2 PU

blank

Polyurethane hold suitable for bouldering in overhang. Sloper with one positive side. Fastened with capheaded or countersunk bolts M10 (dual system) and one screw. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Great for bouldering Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials…

Read More

MEGA 3 PU

blank

Polyurethane hold with many possibilities for use in boulders or climbing routes. Fastened with capheaded or countersunk bolts M10 (dual system) and one screw. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be…

Read More

MEGA 4 PU

blank

Big polyurethane sloper suitable for bouldering. Fastened with capheaded or countersunk bolts M10 (dual system) and one screw. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Great for bouldering Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush…

Read More

XTR 1 PU

blank

One rounded hold we often call it “Globus”. This hold is one of first big aix holds, it’s great sloper, you will love it. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design. Great for bouldering. Low weight – polyuretan. Holoubek – Holow back Weight [g]: 1900 Max. surface…

Read More

XTR 2 PU

blank

One hold, long like snake. Great for bouldering. Fastened with capheaded or countersunk bolts M10 (dual system) and two screws.. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Weight [g]: 1500 Max. surface slope: 30° Grip: pinch Number of holds: 1 pcs No.: #785 Montage: 1pcs capheaded bolts -1 x M10…

Read More

XTR 5 PU

blank

One big sloper with one positive place for hold. This holdis cool in 45° Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Great for bouldering. Low weight – polyuretan. Holoubek – Holow back Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should…

Read More

XTR 6 PU

blank

One big, rounded square shapes hold. This hold is often used for bouldering competitions. Fastened with capheaded bolt M10. Bolt are not included. Great for bouldering. Low weight – polyuretan. Holoubek – Holow back Weight [g]: 1500 Max. surface slope: 0° Grip: sloper Number of holds: 1 pcs No.: #789 Montage: 1pcs capheaded bolt –…

Read More

FATBOY BOB PU

blank

One realy big sloper hold shaped by Rober Leistner. Fastened with capheaded  bolt M10 x 160 and screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Shaped by Robert Leistner Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should…

Read More

FATBOY BILL PU

blank

One big sloper shaped by Rober Leistner. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Shaped by Robert Leistner Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should…

Read More

FATBOY BUD PU

blank

One big sloper shaped by Rober Leistner. Fastened with capheaded or countersunk bolts M10 x 150 (dual system) and screws. Bolts are not included. Warning: Bolt M10 x 150! Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Shaped by Robert Leistner Properties of polyurethane holds are more softness and flexibility. Due…

Read More

ELEMENT 1 TURTLE

blank

One big hold “turtle” usable as crimp and sloper. Fastened using the self drilling screws. Bolts are not included. Attractive design Weight [g]: 2528 Max. surface slope: 30° Grip: small crimp Number of holds: 1 pcs No.: #797 Montage: 5pcs screws M 5.0 x 60 mm. Tightening torque acting on the screw fastening is recommended…

Read More

JIBS 1

blank

Ten screw-on positive holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 1082 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set Montage: 34pcs of screws M 5.0 x 35 mm. Tightening torque acting on the screw fastening is…

Read More

JIBS 2

blank

Ten screw-on crimpy holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 1082 Max. surface slope: 0° Grip: small crimp Number of holds: 10 pcs/set No.: #71, #72, #73, #74, #75, #76, #77, #78, #79, #80, Montage: 25pcs of screws M…

Read More

JIBS 3

blank

Ten screw-on slopy holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 947 Max. surface slope: -10° Grip: sloper Number of holds: 10 pcs/set No.: #81, #82, #83, #84, #85, #86, #87, #88, #89, #90 Montage: 24pcs of screws M 5.0…

Read More

JIBS 4

blank

Ten screw-on positive holds in “fontainebleau” shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 1006 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set No.: #91, #92, #93, #94, #95, #96, #97, #98, #99, #100 Montage: 27pcs of screws M…

Read More

MICRO A DUAL

blank

Twenty positive footholds of various shapes. Fastened with cap head bolts M10. Bolts are not included. Weight [g]: 678 Max. surface slope: 60° Grip: foothold Number of holds: 20 pcs/set Montage: 20pcs cap head bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended for maximum 25Nm. Size: 20 x micro…

Read More

MICRO B DUAL

blank

Twenty footholds of various shapes. Fastened with cap head bolts M10. Bolts are not included. Weight [g]: 705 Max. surface slope: 45° Grip: foothold Number of holds: 20 pcs/set Montage: 20pcs cap head bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended for maximum 25Nm. Size: 20 x micro Material:…

Read More

STUPY 1

blank

Twenty positive footholds of various shapes (according to our design of our sets). Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 1177 Max. surface slope: 60° Grip: foothold Number of holds: 20 pcs/set No.: #151, #152, #153, #154, #155, #156, #157, #158, #159, #160, #161, #162, #163, #164, #165, #166, #167, #168,…

Read More

XS 1

blank

Ten small holds of round shapes. Fastened with capheaded bolts M10. Holds are also suitable for use as large footholds. Bolts are not included. Weight [g]: 1130 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set No.: #201, #202, #203, #204, #205, #206, #207, #208, #209, #210 Montage: 10pcs capheaded bolts M10 x…

Read More

XS 1 MIX

blank

Ten small holds of sloper shapes in ten random colors. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 1130 Max. surface slope: 0° Grip: for children Number of holds: 10 pcs/set No.: #201, #202, #203, #204, #205, #206, #207, #208, #209, #210 Montage:…

Read More

XS 2

blank

Ten small holds of positive shapes. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 1201 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set No.: #211, #212, #213, #214, #215, #216, #217, #218, #219, #220 Montage: 10pcs capheaded bolts M10 x…

Read More

XS 2 MIX

blank

Ten small holds of positive shapes in ten random colors. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 1201 Max. surface slope: 30° Grip: for children Number of holds: 10 pcs/set No.: #211, #212, #213, #214, #215, #216, #217, #218, #219, #220 Montage:…

Read More

XS 3

blank

Ten small holds of positive shapes. Fastened with capheaded bolts M10. Holds are also suitable for use on children’s walls. Bolts are not included. Weight [g]: 839 Max. surface slope: 30° Grip: edge Number of holds: 10 set/set Montage: 10pcs capheaded bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended…

Read More

XS 4

blank

Ten small holds of crimpy shapes. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 946 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended for maximum 25Nm. Size: 10 x XS Material:…

Read More

S1

blank

Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds, children walls or climbing at overhang. Bolts are not included. Weight [g]: 2080 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set No.: #241, #242, #243, #244, #245, #246, #247, #248, #249, #250 Montage: 10pcs capheaded…

Read More

S1 MIX

blank

Ten holds of positive shapes in random colors. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds, children walls or climbing at overhang. Bolts are not included. Weight [g]: 2080 Max. surface slope: 60° Grip: for children Number of holds: 10 pcs/set No.: #241, #242, #243, #244, #245, #246, #247, #248, #249,…

Read More

S2

blank

Ten holds of positive-pocket shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds, children walls or climbing at overhang. Bolts are not included. Weight [g]: 1569 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set No.: #251, #252, #253, #254, #255, #256, #257, #258, #259, #260 Montage: 10pcs capheaded…

Read More

S3

blank

Ten holds of crimpy shapes. Fastened with capheaded bolts M10. Useful for intermediate climbers. Bolts are not included. Weight [g]: 1662 Max. surface slope: 0° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening torque acting on the bolt fastening…

Read More

S4

blank

Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls. Bolts are not included. Weight [g]: 1491 Max. surface slope: 45° Grip: edge Number of holds: 10 pcs/set No.: #271, #272, #273, #274, #275, #276, #277, #278, #279, #280 Montage: 10pcs capheaded bolts M10 x…

Read More

S6

blank

Ten positive holds. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 60° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50 mm. Tightening torque acting…

Read More

S 7 DROPS

blank

You will try to use thumb during climbing on this ten crimp holds. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Climbing holds great for bouldering and hard endurance routes. Attractive design. Weight [g]: 2750 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set No.:…

Read More

S 8 CORC

blank

Ten crimps holds. On these climbing holds you will try push your fingers deeper inside. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Climbing holds great for bouldering and hard endurance routes. Picot edge design. Weight [g]: 2344 Max. surface slope: 30° Grip: small crimp Number of holds:…

Read More

MEDIUM 1

blank

Ten holds of slopery shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls. Bolts are not included. Weight [g]: 2352 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening…

Read More

MEDIUM 2

blank

Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls. Bolts are not included. Weight [g]: 2604 Max. surface slope: 45° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm Tightening torque acting on the bolt fastening is recommended…

Read More

MEDIUM 3

blank

Ten holds of positive shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls Bolts are not included. Weight [g]: 2832 Max. surface slope: 45° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 5x M10 x 40 mm, 3x M10 x 50 mm, 2x M10…

Read More

DÍRY 3

blank

Ten positive fingerpocket holds. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 6870 Max. surface slope: 60° Grip: Fingerpocket Number of holds: 10 pcs/set No.: #331, #332, #333, #334, #335, #336, #337, #338, #339, #340 Montage: 10pcs capheaded bolts – 2x M10 x 40 mm, 7x M10 x 50 mm, 1x M10…

Read More

DÍRY 4

blank

Ten fingerpockets different sizes. Fastened with capheaded bolts M10. Useful for intermediate climbers. Bolts are not included. Weight [g]: 2485 Max. surface slope: 30° Grip: Fingerpocket Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 10x M10 x 40 mm + 10pcs screws M 5.0 x 40 mm.Tightening torque acting on the bolt fastening…

Read More

SELECT 1

blank

Six pockets holds. Selection of best holds from archived sets of holds. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. For bouldering. Weight [g]: 2624 Max. surface slope: 0° Grip: Fingerpocket Number of holds: 6 pcs/set No.: #321, #322, #323, #324, #325, #326 Montage: 6pcs capheaded bolts – 2x M10…

Read More

OBLINY 4

blank

Ten good slopers. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4389 Max. surface slope: 45° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 6x M10 x 50 mm, 3x M10 x 60 mm, 1x M10 x 70 mm. Tightening torque acting on the bolt fastening is recommended for…

Read More

OBLINY 5

blank

Ten grips, various sizes mostly round shapes with design line. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4400 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 1x M10 x 40 mm, 8x M10 x 50 mm, 1x M10 x 60 mm + 10pcs screws…

Read More

SELECT 2

blank

Five sloper holds. Selection of best holds from archived sets of holds. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. For bouldering. Weight [g]: 5802 Max. surface slope: 0° Grip: sloper Number of holds: 5 pcs/set No.: #361, #362, #373, #384, #385 Montage: 5pcs capheaded bolts – 2x M10 x…

Read More

NATURE 1

blank

Ten positive holds of different sizes, shape reminiscent of french bouldering area of Fontainebleau. Fastened with screws M10 capheaded holds. Bolts are not included. Weight [g]: 5070 Max. surface slope: 45° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 5x M10 x 40 mm, 2x M10 x 50 mm, 2x M10 x…

Read More

NATURE 3

blank

Ten holds of different sizes, shapes and roughened surface like holds in granite areas. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 2262 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 8x M10 x 40 mm, 2x M10 x 50 mm. Tightening torque acting…

Read More

NATURE 4

blank

Ten holds of different sizes, shape reminiscent of french bouldering area of Fontainebleau. Fastened with screws M10 capheaded holds. Bolts are not included. Weight [g]: 3950 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6x M10 x 40 mm, 1x M10 x 50 mm, 1x M10 x…

Read More

COSMIX 1

blank

Ten holds of various sizes, shape allowing several modes of grip. Bolts are not included. Weight [g]: 2129 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 9x M10 x 40 mm, 1x M10 x 50 mm + 4pcs screws M 5.0 x 40 mm. Tightening torque acting…

Read More

COSMIX 2

blank

Ten crimpy holds of various sizes. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4010 Max. surface slope: 30° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 8x M10 x 40 mm, 1x M10 x 50 mm, 1x M10 x 60 mm + 8pcs screws M 5.0 x…

Read More

COSMIX 3

blank

Ten holds “piggy or stumps” of various sizes, shape allowing several ways of grip. Bolts are not included. Weight [g]: 4450 Max. surface slope: 60° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 7x M10 x 40 mm, 2x M10 x 50 mm, 1x M10 x 60 mm + 9pcs screws…

Read More

COSMIX 4

blank

Ten holds of various sizes, shape allowing several ways of grip. Bolts are not included. Weight [g]: 2172 Max. surface slope: 30° Grip: pinch Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 10x M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening torque acting on the bolt fastening is…

Read More

COSMIX 5

blank

Ten holds in the rock design, suitable for advanced climbers. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 45° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs…

Read More

SELECT 4

blank

Eight pinch holds. Selection of best holds from archived sets of holds. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Weight [g]: 2719 Max. surface slope: 45° Grip: pinch Number of holds: 8 pcs/set No.: #531, #532, #533, #534, #535, #536, #557, #558, Montage: 8pcs capheaded bolts – 5x M10…

Read More

SELECT 5

blank

Six pinch holds. Selection of best holds from archived sets of holds. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. For creating endurance routes. Weight [g]: 3460 Max. surface slope: 30° Grip: pinch Number of holds: 6 pcs/set No.: #551, #552, #553, #523, #524, #525 Montage: 6pcs capheaded bolts –…

Read More