Fins 4.01 PU

blank

Ten crimps. Holds are suitable for vertical climbing and hard climbing in overhangs. Fastened with screws. Bolts are not included. Suitable for advanced climbers. 14401 – 14 Fins, 4 – M, 01 – Number Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush during cleaning due to…

Read More

COMA 2 PU

blank

Three sloper holds with design. Holds are suitable to verticals angles of climbing wall. Fastened with capheaded or countersunk bolts (dual system) and three screws. Bolts are not included. Holoubek – Holow back Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush…

Read More

COMA 3 PU

blank

Three big holds with design. Holds are suitable to overhang angles of climbing wall. Climbing holds with variable difficutly depending on mounting orientation. Fastened with capheaded or countersunk bolts (dual system) and three screws. Bolts are not included. Climbing holds with variable difficutly depending on mounting orientation. Holoubek – Holow back Properties of polyurethane holds…

Read More

MEGA 5 PU

blank

Big polyurethane sloper / pinch with design suitable for bouldering. Fastened with capheaded or countersunk bolts M10 (dual system) and one screw. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Great for bouldering Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not…

Read More

CRATER 1 PU

blank

One big crimpy ring hold. In Crater 1 there is one part which is bigger then rest of hold. You can use this hold also in overhangs. Fastened with capheaded or countersunk bolts M10 (dual system) or with three screews . Bolts are not included. Possibility of mounting screws only. Diameter 40cm Attractive design. Easily…

Read More

CRATER 2 PU

blank

One big ring hold. Crater 2 is slopy more then crimpy inside. Fastened with capheaded or countersunk bolts M10 (dual system) or with three screews . Bolts are not included. Possibility of mounting screws only. Diameter 40cm Attractive design. Easily recognizable on the climbing wall. Great for bouldering. Low weight – polyuretan. Weight [g]: 1700…

Read More

CRATER 3 PU

blank

One big ring hold. Crater 3 is most positive from three craters. You can use this hold also in overhangs. Fastened with capheaded or countersunk bolts M10 (dual system) or with three screews. Bolts are not included. Possibility of mounting screws only. Diameter 40cm Attractive design. Easily recognizable on the climbing wall. Great for bouldering.…

Read More

CRATER 4 PU

blank

Circle climbing hold with atractive design. Hold is suitable for climbing in overhanging profiles. Fastened with capheaded bolts M10 and eight screws. Bolts are not included. This climbing hold is great for intermediate climbers. Weight [g]: 1500 Max. surface slope: 45° Grip: jug Number of holds: 1 pc/set No.: #1338 Montage: 1 pc capheaded bolts…

Read More

CRATER 5 PU

blank

Circle climbing hold with atractive design. Hold is suitable for climbing in overhanging profiles. Fastened with capheaded bolts M10 and three screws. Bolts are not included. This climbing hold is great for intermediate climbers. Weight [g]: 1770 Max. surface slope: 45° Grip: Fingerpocket Number of holds: 1 pc/set No.: #1339 Montage: 1 pc capheaded bolts…

Read More

CRATER GIANT PU

blank

Big circle hold. Hold is suitable for climbing in overhang. Fastened with capheaded bolts M10 (dual system) and eight screws. Screws are not included in set. Suitable for climbing in overhang, beginners to intermediate climbers. Weight [g]: 6150 Max. surface slope: 30° Grip: Fingerpocket Number of footholds: 1 pc/set No.: #1354 Montage: 1 pc capheaded…

Read More

JIBS 5

blank

Ten screw-on positive holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 990 Max. surface slope: 30° Grip: small crimp Number of holds: 10 pcs/set No.: #101, #102, #103, #104, #105, #106, #107, #108, #109, #110 Montage: 20 pcs of screws…

Read More

S5

blank

Ten positive holds in the limestone design. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50…

Read More

DÍRY 5

blank

Five holds, different sizes of shapes with a hole design. Fastened with capheaded bolts M10 or just screws anywhere on the wall. Bolts are not included. Possibility fasten only with screews. Weight [g]: 5790 Max. surface slope: 30° Grip: Fingerpocket Number of holds: 5 pcs/set Montage: Holds can be mounted in combination with bolt and…

Read More

DÍRY 6

blank

Five holds, different sizes of shapes with a hole design. Fastened with capheaded bolts M10 or just screws anywhere on the wall. Bolts are not included. Possibility fasten only with screews. Weight [g]: 5520 Max. surface slope: 30° Grip: Fingerpocket Number of holds: 5 pcs/set Montage: Holds can be mounted in combination with bolt and…

Read More

NATURE 2

blank

Ten positive holds different sizes, shape reminiscent holds of french limestone areas. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 3505 Max. surface slope: 90° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 6x M10 x 40 mm, 2x M10 x 50 mm, 1x M10 x 60 mm, 1x…

Read More

NATURE 5

blank

Ten holds of different sizes. The shape is suitable for difficult climbing in the more overhang profile. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 5688 Max. surface slope: 60° Grip: edge Number of holds: 10 pcs/set Montage: 10pcs capheaded – 5x M10 x 50 mm, 5x M10 x 60 mm, +…

Read More

NATURE 7

blank

Ten positive holds similar sizes, shape reminiscent holds of french limestone areas. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 3900 Max. surface slope: 90° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50 mm. Tightening torque acting on the…

Read More

NATURE 9

blank

Ten positive holds in the limestone design. Washer is made of dual-system, thus holds are fastened with screws M10 cylindrical or conical head. Bolts are not included. Weight [g]: 3900 Max. surface slope: 60° Grip: jug Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6pcs M10 x 40 mm, 4pcs M10 x 50…

Read More

STISK 3

blank

Ten pinch-holds of various sizes. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 2997 Max. surface slope: 30° Grip: pinch Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 5x M10 x 40 mm, 5x M10 x 50 mm. Tightening torque acting on the bolt fastening is recommended for maximum 40Nm.…

Read More

HIFIVE 3

blank

Five crimpy holds “whales” enabling takeover holds with both hands. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 5662 Max. surface slope: 45° Grip: edge Number of holds: 5 pcs/set No.: #761, #762, #763, #764, #765, Montage: 5pcs capheaded bolts 2x M10 x 50 mm, 3x M10 x 60 mm + 5pcs…

Read More

BIG 5

blank

One big hold. Fastened with capheaded or countersunk bolt M10 (dual system) and one screw. Bolts are not included. Attractive design Weight [g]: 1493 Max. surface slope: 0° Grip: small crimp Number of holds: 1 pcs No.: #775 Montage: 1pcs capheaded bolt -1 x M10 x 60 mm + 1 pcs screw M 5.0 x…

Read More