Kite 025 XL R – PU

blank

Polyuretane pinch with dual texture. The hold is suitable for advanced climbers and for seting hard boulders and routes. Fastened with capheaded bolt M10 and four screws. Bolt is not included. AIX PLUS Kite range by Jan Zbranek. Dual texture makes slipery places on the hold. Suitable for advanced climbers. Clear Design. 025 XL R –  025-position, XL size, R righthanded, – sloper Properties…

Read More

SPUME POD PU

blank

One big sloper in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 2500 Max. surface slope: 30° Grip: sloper Number of holds: 1 pcs No.: #986 Montage: 1pcs capheaded bolts -1 x M10 x 120 mm +…

Read More

SPUME PADDLE PU

blank

One long, big sloper holds in the Spume design is 78cm long! Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Length 78cm Properties of polyurethane holds are more softness and flexibility. Due to these properties of…

Read More

MICRO C PU

blank

Twenty footholds of flat shapes. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush during cleaning due to surface smoothing holds! Weight [g]: 730 Max. surface slope: 0° Grip:…

Read More

OBLINY 7 PU

blank

Twenty flatted holds, similar sizes, mostly round shapes suitable for use on volumes. Very good also as footholds. Fastened with capheaded bolts M10. Bolts are not included. Great for bouldering. Suitable for use on volumes. Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used…

Read More

GUTS PUFFBALL PU

blank

Big positive sloper with anatomically rounded grip. Hold is suitable for beginning climbers or climbing in big overhang. Fastened with capheaded or countersunk bolts M10 (dual system) and screw. Bolts are not included. Suitable for beginning climbers or climbing in big overhang. Nice Design. Properties of polyurethane holds are more softness and flexibility. Due to…

Read More

RINX XTR PU

blank

One big hold with rounded shape. Fastened with capheaded or countersunk bolt M10 (dual system) and two screws. Bolts are not included. Hold is roughened on one side and positive on other side. Design rings on surface. Holoubek – Holow back Properties of polyurethane holds are more softness and flexibility. Due to these properties of…

Read More

RINX XTR 3 PU

blank

One big positive hold with rounded shape. Hold is suitable to all angles of climbing wall. Fastened with capheaded bolt M10 x 100 and three screws. Bolts are not included. Warning: Bolt M10 x 100! Hold is roughened on surface and very positive on one side. Design rings on surface. Holoubek – Holow back Properties…

Read More

RINX XTR 4 PU

blank

One big positive hold with rounded shape. Hold is suitable to all angles of climbing wall. Fastened with capheaded bolt M10 x 120 and two screws. Bolts are not included. Warning: Bolt M10 x 120! Hold is roughened on surface and very positive on one side. Design rings on surface. Holoubek – Holow back Properties…

Read More

RINX XTR 5 PU

blank

One big positive hold with rounded shape. Hold is suitable to all angles of climbing wall. Fastened with capheaded bolt M10 x 130 and two screws. Bolts are not included.  Hold is roughened on surface and very positive on one side. Design rings on surface. Holoubek – Holow back Properties of polyurethane holds are more…

Read More

LORD OF RINX PU

blank

One huge positiv hold with rounded shape. Hold is suitable to all angles of climbing wall. Fastened with capheaded or countersunk bolt M10 x 120 (dual system) and two screws. Bolts are not included. Warning: Bolt M10 x 120! Hold is roughened on one side and very positive on other side. Design rings on surface.…

Read More

COMA 2 PU

blank

Three sloper holds with design. Holds are suitable to verticals angles of climbing wall. Fastened with capheaded or countersunk bolts (dual system) and three screws. Bolts are not included. Holoubek – Holow back Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush…

Read More

CANT XTR 1 PU

blank

One big slopy crimp hold with border line on surface. One side of climbing hold is flat and suitable for mounting screw holds. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. One side of hold is flat and suitable for mounting screw holds. Great for bouldering. Holoubek –…

Read More

CANT XTR 2 PU

blank

One big slopy hold with border line on surface. One side of climbing hold is flat and suitable for mounting screw holds. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. One side of hold is flat and suitable for mounting screw holds. Great for bouldering. Holoubek – Holow…

Read More

MEGA 2 PU

blank

Polyurethane hold suitable for bouldering in overhang. Sloper with one positive side. Fastened with capheaded or countersunk bolts M10 (dual system) and one screw. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Great for bouldering Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials…

Read More

MEGA 4 PU

blank

Big polyurethane sloper suitable for bouldering. Fastened with capheaded or countersunk bolts M10 (dual system) and one screw. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Great for bouldering Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not be used wire brush…

Read More

MEGA 5 PU

blank

Big polyurethane sloper / pinch with design suitable for bouldering. Fastened with capheaded or countersunk bolts M10 (dual system) and one screw. Bolts are not included. Low weight – polyuretan. Holoubek – Holow back Great for bouldering Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not…

Read More

XTR 1 PU

blank

One rounded hold we often call it “Globus”. This hold is one of first big aix holds, it’s great sloper, you will love it. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design. Great for bouldering. Low weight – polyuretan. Holoubek – Holow back Weight [g]: 1900 Max. surface…

Read More

XTR 5 PU

blank

One big sloper with one positive place for hold. This holdis cool in 45° Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Great for bouldering. Low weight – polyuretan. Holoubek – Holow back Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should…

Read More

XTR 6 PU

blank

One big, rounded square shapes hold. This hold is often used for bouldering competitions. Fastened with capheaded bolt M10. Bolt are not included. Great for bouldering. Low weight – polyuretan. Holoubek – Holow back Weight [g]: 1500 Max. surface slope: 0° Grip: sloper Number of holds: 1 pcs No.: #789 Montage: 1pcs capheaded bolt –…

Read More

XTR 7 PU

blank

One big hold with harmonious shapes. We call it “kozy” Fastened with capheaded or countersunk bolt M10 (dual system) and one screw. Bolts are not included. Great for bouldering. Low weight – polyuretan. Holoubek – Holow back Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should not…

Read More

CRATER GIANT PU

blank

Big circle hold. Hold is suitable for climbing in overhang. Fastened with capheaded bolts M10 (dual system) and eight screws. Screws are not included in set. Suitable for climbing in overhang, beginners to intermediate climbers. Weight [g]: 6150 Max. surface slope: 30° Grip: Fingerpocket Number of footholds: 1 pc/set No.: #1354 Montage: 1 pc capheaded…

Read More

FATBOY BOB PU

blank

One realy big sloper hold shaped by Rober Leistner. Fastened with capheaded  bolt M10 x 160 and screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Shaped by Robert Leistner Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should…

Read More

FATBOY BILL PU

blank

One big sloper shaped by Rober Leistner. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Shaped by Robert Leistner Properties of polyurethane holds are more softness and flexibility. Due to these properties of polyurethane materials should…

Read More

FATBOY BUD PU

blank

One big sloper shaped by Rober Leistner. Fastened with capheaded or countersunk bolts M10 x 150 (dual system) and screws. Bolts are not included. Warning: Bolt M10 x 150! Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Shaped by Robert Leistner Properties of polyurethane holds are more softness and flexibility. Due…

Read More

ELEMENT 1 TURTLE

blank

One big hold “turtle” usable as crimp and sloper. Fastened using the self drilling screws. Bolts are not included. Attractive design Weight [g]: 2528 Max. surface slope: 30° Grip: small crimp Number of holds: 1 pcs No.: #797 Montage: 5pcs screws M 5.0 x 60 mm. Tightening torque acting on the screw fastening is recommended…

Read More

ELEMENT 3 DONUT PU

blank

One big ring hold with balls. Donut is big positive sloper with many possibilities for hold. Fastened using the self drilling screws. Bolts are not included. Mounting screws only. Diameter 58cm Attractive design. Easily recognizable on the climbing wall. Great for bouldering. Low weight – polyuretan. Steel washers inside Holoubek – Holow back Weight [g]:…

Read More

SPUME SLOPERS 1

blank

Six sloper holds in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 7410 Max. surface slope: 30° Grip: sloper Number of holds: 6 pcs/set No.: 980, 981, 982, 983, 984,985 Montage: 6pcs capheaded bolts – 2x M10…

Read More

SPUME SLOPERS 2

blank

Bolts are not included. Attractive design. Easily recognizable holds on the climbing wall. Great for bouldering. Weight [g]: 6600 Max. surface slope: 0° Grip: sloper Number of holds: 6 pcs/set No.: #991, #992, #993, #994, #995, #996 Montage: 6pcs capheaded bolts – 1x M10 x 40 mm, 1x M10 x 50 mm, 3x M10 x…

Read More

SPUME BIG SLOPERS

blank

Two big sloper holds in the Spume design. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Holoubek – Holow back Weight [g]: 3800 Max. surface slope: 45° Grip: sloper Number of holds: 2 pcs/set No.: #989, #990 Montage: 2pcs capheaded…

Read More

SPUME ONE

blank

One big hold in the range Spume. Fastened with capheaded or countersunk bolts M10 (dual system) or with three screws. Bolts are not included. Attractive design Easily recognizable on the climbing wall Weight [g]: 3800 Max. surface slope: 30° Grip: sloper Number of holds: 1 pcs No.: #950 Montage: 1pcs capheaded bolts -1 x M10…

Read More

JIBS 1

blank

Ten screw-on positive holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 1082 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set Montage: 34pcs of screws M 5.0 x 35 mm. Tightening torque acting on the screw fastening is…

Read More

JIBS 3

blank

Ten screw-on slopy holds in various shapes. Useful for intermediate climbers! They are for fixing on flat plywood. Screws are not included in set. Weight [g]: 947 Max. surface slope: -10° Grip: sloper Number of holds: 10 pcs/set No.: #81, #82, #83, #84, #85, #86, #87, #88, #89, #90 Montage: 24pcs of screws M 5.0…

Read More

XS 1

blank

Ten small holds of round shapes. Fastened with capheaded bolts M10. Holds are also suitable for use as large footholds. Bolts are not included. Weight [g]: 1130 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set No.: #201, #202, #203, #204, #205, #206, #207, #208, #209, #210 Montage: 10pcs capheaded bolts M10 x…

Read More

MEDIUM 1

blank

Ten holds of slopery shapes. Fastened with capheaded bolts M10. Holds are suitable for use on playgrounds or children walls. Bolts are not included. Weight [g]: 2352 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening…

Read More

OBLINY 4

blank

Ten good slopers. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4389 Max. surface slope: 45° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 6x M10 x 50 mm, 3x M10 x 60 mm, 1x M10 x 70 mm. Tightening torque acting on the bolt fastening is recommended for…

Read More

OBLINY 5

blank

Ten grips, various sizes mostly round shapes with design line. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 4400 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 1x M10 x 40 mm, 8x M10 x 50 mm, 1x M10 x 60 mm + 10pcs screws…

Read More

OBLINY 6 Cant

blank

Ten flatted grips, similar sizes, mostly round shapes. Fastened with capheaded bolts M10. Bolts are not included. Weight [g]: 2550 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts 10x M10 x 40 mm + 10pcs screws M 5.0 x 40 mm. Tightening torque acting on the bolt fastening…

Read More

SELECT 2

blank

Five sloper holds. Selection of best holds from archived sets of holds. Fastened with capheaded or countersunk bolts M10 (dual system). Bolts are not included. For bouldering. Weight [g]: 5802 Max. surface slope: 0° Grip: sloper Number of holds: 5 pcs/set No.: #361, #362, #373, #384, #385 Montage: 5pcs capheaded bolts – 2x M10 x…

Read More

NATURE 4

blank

Ten holds of different sizes, shape reminiscent of french bouldering area of Fontainebleau. Fastened with screws M10 capheaded holds. Bolts are not included. Weight [g]: 3950 Max. surface slope: 30° Grip: sloper Number of holds: 10 pcs/set Montage: 10pcs capheaded bolts – 6x M10 x 40 mm, 1x M10 x 50 mm, 1x M10 x…

Read More

CANT MEDIUM

blank

Eight sloper holds with border line on surface. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Great for bouldering and endurance routes. Weight [g]: 5110 Max. surface slope: 30° Grip: sloper Number of holds: 8 pcs/set No.: #1089, #1090, #1091, #1092, #1093, #1094, #1095, #1096 Montage: 8 pcs…

Read More

CANT LARGE

blank

Six slopy holds with border line on surface. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Great for bouldering and endurance routes. Weight [g]: 7779 Max. surface slope: 30° Grip: sloper Number of holds: 6 pcs/set No.: #1083, #1084, #1085, #1086, #1087, #1088 Montage: 6 pcs capheaded bolts…

Read More

CANT LARGE 2

blank

Eight slopy crimp holds with border line on surface. One side of hold is flat and suitable for mounting screw holds. Fastened with capheaded or countersunk bolts M10 (dual system) and screws. Bolts are not included. Great for bouldering Weight [g]: 3100 Max. surface slope: 0° Grip: sloper Number of holds: 10 pcs/set No.: #1139,…

Read More

BIG 1

blank

One big hold with one positive place to grip.  Fastened with capheaded bolt M10 and one screw. Bolts are not included. Weight [g]: 1904 Max. surface slope: 0° Grip: sloper Number of holds: 1 pcs No.: #771 Montage: 1pcs capheaded bolt -1 x M10 x 70 mm + 1 pcs screws M 5.0 x 40…

Read More

BIG 2

blank

One big anatomic sloper. Fastened with capheaded bolt M10 and one screw. Bolts are not included. Weight [g]: 1558 Max. surface slope: 0° Grip: sloper Number of holds: 1 pcs No.: #772 Montage: 1pcs capheaded bolts -1 x M10 x 90 mm + 1 pcs screw M 5.0 x 40 mm. Tightening torque acting on…

Read More

BIG 3

blank

One big slopy hold. Fastened with capheaded bolt M10 and one screw. Bolts are not included. Weight [g]: 1488 Max. surface slope: 0° Grip: sloper Number of holds: 1 pcs No.: #773 Montage: 1pcs capheaded bolt -1 x M10 x 70 mm + 1 pcs screw M 5.0 x 40 mm. Tightening torque acting on…

Read More

BIG 7

blank

One big sloper hold. Fastened with capheaded or countersunk bolt M10 (dual system) and one screw. Bolts are not included. Weight [g]: 1326 Max. surface slope: 30° Grip: sloper Number of holds: 1 pcs No.: #777 Montage: 1pcs capheaded bolt -1 x M10 x 80 mm + 1 pcs screw M 5.0 x 40 mm.…

Read More

BIG 8

blank

One big sloper hold. Fastened with capheaded or countersunk bolt M10 (dual system) and one screw. Bolts are not included. Weight [g]: 1470 Max. surface slope: 0° Grip: sloper Number of holds: 1 pcs No.: #778 Montage: 1pcs capheaded bolt -1 x M10 x 90 mm + 1 pcs screw M 5.0 x 35 mm.…

Read More

TERRA 1

blank

One big ring sloper/pinch. Hold is highly variable, you can also change hands in it. Suitable for endurance routes. Fastened with capheaded or countersunk bolts M10 (dual system) a two screws. Bolts are not included. Realy good one. Highly variable Weight [g]: 4800 Max. surface slope: 45° Grip: sloper Number of holds: 1 pcs No.:…

Read More